ANALYTICAL PHOTOGRAMMETRIC INSTRUMENTS
2
dependently given control data, a method
that is justifiable as long as one recognizes
that the pseudo-svstematic accumulation of
random errors is not improved by such tech
niques.
Accepting the weakness of any generaliza
tion, it is possible, therefore, to say that the
present generation of photogrammetric,
analogue, data-reduction equipment is ad
equate for the photogrammetric data evalua
tion process, as long as the photogrammetric
record (the photograph) is considered as a
more or less true central perspective, affected
only by random errors or by a population of
systematic errors of about equal magnitude
which, when acting jointly, compensate
partly for each other and which, in accordance
with the central limit theorem, can be ad
justed together with the normally distributed
measuring errors by applying data evaluation
techniques which are based on—or which are
sufficiently close to—the principle of least
squares.
The potential of the present analogue ap
proach is further enhanced because the data
evaluation process is intuitive and can in
general, be executed by men less skilled than
those needed to perform an equivalent,
strictly numerical data evaluation.
This statement is not meant to contradict
the well-established fact that the measuring
process on a comparator-type instrument is
simpler and can, therefore, be accomplished
by less-skilled manpower. However, prac
tical experience has shown that the handling
of large amounts of data by strictly numer
ical evaluation principles demands a higher
level of organization within an agency and
more highly skilled manpower to supervise
production and analyze results for statistical
significance.
Therefore, the conclusion can be drawn,
supported by the results of routine work, that
the new field of analytical photogrammetry
does not offer significant advantages in terms
of the accuracy of the end product, as long as
the previously stated assumptions concerning
bias errors in the photographic record hold,
and as long as the accuracy requirements are
not in excess of the aforementioned error
bounds. The question of economy is another
matter which will be considered later.
An equally valid conclusion is that the
analogue approach cannot be expected to be
capable of a significant increase in accuracy,
mainly because any significant improvement
of the accuracy of the photogrammetric
measuring method can only be obtained by
acknowledging the fact that the principle of
central perspective is only a first approxima
tion. Deviations of a systematic nature,
which are not consistent with the concept of
central perspective, are caused by specific
physical conditions of the atmosphere at the
moment of exposure and by physical and
chemical influences which affect the process
of taking the photographs.
The most obvious bias errors are those in
troduced by the influences of asymmetrical
radial and (the so improperly named) tan
gential distortion. Furthermore, there are in
fluences affecting, in a systematic way, the
dimensional stability of the emulsion carrier
as a whole, as distinguished from random
emulsion shifts. And, very significant, there
are changes in the calibrated elements of in
terior orientation brought about by the in
stantaneous environmental conditions pre
vailing at the time of exposure.
An important consideration in the area of
photogrammetric data acquisition is the trend
towards the use of panoramic cameras. In
such systems, the concept of central perspec
tive is purposely sacrificed for longer focal
lengths and the higher resolutions which are
possible with the typically narrow lens open
ing angles. The economically attractive and
technically feasible possibility of a further
increase in flying height will, through the use
of these dynamic data acquisition systems,
provide means to acquire supplementary
photography with scales and resolutions
that are not obtainable with conventional
wide-angle photographic systems. Particu
larly promising is the application of photo
metric methods to photography taken from
satellites for such purposes as lunar mapping.
The removal of dynamic distortions in the
corresponding raw material cannot readily be
accomplished with analogue equipment; and
certainly not to the degree necessary to pro
duce an undistorted photograph which is
sufficiently compatible with the principle of
central perspective so as to be suitable for use
in classic restitution equipment.
Finally, it is necessary to be aware that the
family of sensors available for the execution
of three-dimensional triangulation has al
ready been broadened and will continue to
grow. Not only photography that deviates