X Y Z no.
Control points. | 0.699 | 0.310 | 0.109 4
RMS (m)
Check points 2.748 | 4.791 9
RMS (m)
Image residuals 0.11 0.61 348
(pixels)
Avg. standard 2.43 2.18 8.67 47
error (m)
Table 9: Test (c )Results, 4 Control Points Used
With Nadir Only Pushbroom Sensor
œ (deg.) 0 (deg.) K (deg.)
Flightline 1 2.1025 5.7231 3.3090
Flightline 2 1.7699 5.4316 3.1400
Flightline 3 2.0822 5.7064 2.6167
Table 10: INS/Sensor Offset Angles for
Test (c)
This is due to a poorer geometry with the absence of fore and
aft channels. However, the image residuals are very low
indicating a good internal consistency. Finally, the
distorted image contained in Figure 3 is geocorrected and
shown in Figure 4.
Figure 4: Geocorrected image
Overall, the test results show that georeferencing by
airborne sensors is possible for pushbroom scanners and
CCD frame imagers of this accuracy class. The size of the
residuals at the check points seems mainly due to the quality
of the ground control (2-3 m), and the pixel size.
Georeferencing errors seem to play a minor role at this level
of accuracy. Additional tests using airborne
photogrammetry and a precisely controlled field of ground
targets are planned in the near future. They will provide a
reliable estimate of current system accuracies.
CONCLUSIONS
Results presented in this paper indicate that georeferencing
of airborne remote sensing data is possible by an onboard
GPS/INS system using currently available off-the-shelf
hardware. In this system, GPS provides accurate position
information, while INS provides precise attitude and
velocity information. If a high precision INS is used as a
component of the integrated system, all current accuracy
requirements, including those for high precision
engineering and cadastral applications, can be met. If a
system for the somewhat lower accuracy requirements in the
resource sector are needed, a medium accuracy INS can be used
and the total hardware costs can be reduced to one half. A
georeferencing system based on GPS technology only,
needs further testing before its suitability for these
applications could be affirmed.
Results of a first series of tests with the casi system indicate
that the georeferencing requirements for this pushbroom
scanner are met if four ground control points are used for
system calibration. It appears that the residual errors on
check points are dominated by errors in the control points
(non-targetted) and the pixel size. A more stringent test to
assess the capability of the current system using
photogrammetric techniques is planned in the near future.
ACKNOWLEDGEMENTS
Work on this project was supported by an NSERC Strategic
Grant to the first four authors. Itres Research Ltd is thanked
for its interest in this project and its participation in system
testing. Dr. Ming Wei and Mr. Gengsheng Zhang are
acknowledged for contributing to the INS specifications.
REFERENCES
Babey, S.K., C.D. Anger, 1989. A compact airborne
spectrographic imager (CASI), Proceedings,
International Geoscience and Remote Sensing
Symposium, Vancouver, Canada, pp. 1028 - 1031.
Cannon, M.E., and G. Lachapelle, 1992, Analysis of a High
Performance C/A Code GPS Receiver in Kinematic Mode,
Navigation, Journal of the U.S. Institute of Navigation,
Vol. 39, No.3, pp 285-299.
Cosandier, D., T. Ivanco, S. Mah, 1992. The geocorrection
and integration of the global positioning system with
the compact airborne spectrographic imager, 15th
Canadian Symposium on Remote Sensing, June.
DOT/DOD, 1992, 1992 Federal Radionavigation Plan.DOT-
VNTSC-RSPA-92-2/DOD-4650.5. National Technical
Information Service, Springfield, VA.
A. El-Mowafy, and K.P. Schwarz, 1994. Epoch by Epch
Ambiguity Resolution for Real-Time Attitude
Determination Using a GPS Multi-Antenna System.
Submitted to Navigation, Journal of the US Institute of
Navigation.
Gibson, J.R., M. Buchheit, 1990. Precise Geometric
Processing of Stereo MEIS Imagery, Proceedings ISPRS,
Commission 7.
Leberl, F.W.,1990. Radargrammetric Image Processing,
Artech House, Boston.
Lillesand, T.M., and R.W. Kiefer, 1987. Remote Sensing
and Image Interpretation, Sec. Ed., John Wiley and
Sons: Toronto.
Madsen, S.N., H.A. Zebker and J. Martin, 1993.
Topographic Mapping using Radar Interferometry:
Processing Techniques, IEEE Transactions on Geoscience
200
and Rem
256.
Merchant, I
large s«
Nichol, A. .
1986. .
Transac
GE-24,
Schade, H.
Accurac
Determi
System,
Schwarz, K
Attitude
Meeting
1992. |
Schwarz, K
1993.
Georef
Photogr
2. pp.
Shi, J. and
GPS Po
Proceed
(in pres
Tiemeyer, !
Ambigt
Measure
Flugwis
Till, S.M.,
1987.
Procee
Enviro
Tobler, W.
In Mc
Scienc
Wolf, P.R..
HILL: