The resolution of the DATATAB is .001 inch. It has
repeatability of .001 inch also, and, because it has a high
signal-to-noise ratio, readings will not vary more than .001
inch when the cursor is stationary. This degree of
stability is unique. Through a proprietary process, ALTEK
manufactures the DATATAB with an inherent accuracy of +/-
.003 inch. There is no need to correct for manufacturing
defects with control electronics or individual firmware. As
a result, controllers and cursors are interchangeable
between tables. Of course, less accurate models are
available for less demanding applications at lower costs.
ALTEK manufactures a variety of DATATAB tables to accomodate
the many applications in existence today. In addition to an
opaque surface, there are surfaces with continuously
variable intensity backlighting. There are also translucent
models for customer supplied backlighting. A rear projected
model is made with an extremely fine wire grid bonded to
glass - for projecting images from behind and onto the
tablet's surface. The DATATAB's available sizes range from
121 ix 127040 42" 1x 4130 *..
Intelligent Digitizing
The word "intelligent" can be defined as "displaying sound
judgement" and in today's technical world, "capable of
performing certain computer functions" (Webster's II, New
Riverside University Dictionary). These definitions are
perfect for ALTEK's use of the word. We consider our
customers to be intelligent because they are using sound
judgement when they purchase a digitizer from us. We
consider our products intelligent because they are quite
capable of performing certain computer functions.
In today's world, the customer is considered intelligent if
he can automate his daily tasks to any degree. The rapid
increase in automation has been aided by the development of
the personal computer and its associated peripheral
devices. A whole new industry has arisen from the fact that
for a relatively small investment, virtually anyone can
computerize virtually any application.
Digitizing products have, in the past, done nothing more
than generate X,Y coordinates for input into computer
programs. This meant that there was not much of a choice
that had to be made when considering brands. The user
typically would set an accuracy requirement and then search
for the best buy among vendors who could meet that
requirement. Once the user received the digitizer, the
computer software was then used to do any computations
necessary from the raw X,Y coordinates. The industry,
603