Regine Brügelmann
— first set vector
----. second set vector
© vertex
e additional vertex
di distances between first
and second set vectors
Figure 7: Distances between two sets of vectors
5 CONCLUSIONS
It is shown that automatic breakline extraction from airborne laserdata in principle is feasible. The quality of the extracted
breaklines is rather good, but stays slightly behind the photogrammetrically measured breaklines. The latter technique
has the advantage of simultaneously obtaining semantic information about the measured objects. Nevertheless, there are
applications which do not require such explicit semantic information, e.g. data reduction or derivation of morphologic
correct DEM's. Concerning the geometric aspects (apart from the semantic meaning), further investigations must show
whether automatically extracted breaklines are in the same measure suited for various applications as photogrammetrically
measured breaklines.
REFERENCES
Besl, P., 1986. Surfaces in Range Image Understanding. Springer.
Chakreyavanich, U., 1991. Regular Grid DEM Data Compression by Using Zero-Crossings: The Automatic Breakline
Detection Method. PhD thesis, Columbus: Ohio State University. Report OSU-DGSS No. 412.
Fórstner, W., 1998. Image processing for feature extraction in digital intensity, color and range images. In: Proc. Of the
International Summer School on 'Data Analysis and Statistical Foundations of Geomatics' , Greece, May, 25 Pp., Springer
Lecture Notes on Earth Sciences.
Gomes-Pereira, L. and Janssen, L., 1999. Suitability of laser data for DTM generation: A case study in the context of
road planning and design. ISPRS Journal of Photogrammetry & Remote Sensing 54, pp. 244-253.
Gomes-Pereira, L. and Wicherson, R., 1999. Suitability of laser data for deriving geographical information - a case
study in the context of management of fluvial zones. ISPRS Journal of Photogrammetry & Remote Sensing 54(2-3),
pp. 105-114.
Huising, E. and Gomes-Pereira, L., 1998. Errors and accuracy estimates of laser data acquired by various laser scanning
systems for topographic applications. ISPRS Journal of Photogrammetry & Remote Sensing 53, pp. 245-261.
Kraus, K., 1986. Photogrammetrie. Vol. I, Diimmler Bonn.
Petzold, B., Reiss., P. and Stossel, W., 1999. Laser scanning - surveying and mapping agencies are using a new technique
for the derivation of digital terrain models. ISPRS Journal of Photogrammetry & Remote Sensing 54(2-3), pp. 95-104.
Reed, M., 1997. Fugro FLI-MAP system. EARSeL Newsletter, Special Issue: Laser Scanning pp. 18-21.
Suk, M. and Bhandarkar, S., 1992. Three-Dimensional Object Recognition from Range Images. Springer.
Weidner, U., 1994. Information-preserving surface restoration and feature extraction for digital elevation models. In:
Poceedings of ISPRS Commission III Symposium 'Spatial Information from Digital Photohrammetry and Computer
Vision', Munich.
Wild, D. and Krzystek, P., 1996. Automatic breakline detection using an edge preserving filter. In: International Archives
of Photogrammetry and Remote Sensing, Vol. XXXI, Part B3, Vienna, pp. 946-952.
116 International Archives of Photogrammetry and Remote Sensing. Vol. XXXIII, Part B3. Amsterdam 2000.