‘the sun's
1, but the
e heat of
)bjects in
K = -273
'S energy
ng at 9.7
e thermal
band (0.7
tive film.
R energy
elated to
ctrum, it
ly related
| is not.
radiation.
etect and
images,
nperature
ermal IR
I vapour
bsorption
0 5 um
Xf 9 to 10
he ozone
ie. effects
1e record
ft, which
ecord the
CO;
5 um t
12 14
—
m
| bands
spheric
IAPRS & SIS, Vol.34, Part 7, “Resource and Environmental Monitoring”, Hyderabad, India, 2002
4. CASE STUDY
During the fast increase of water elevation in the river Waal at
the location Nieuwaal, Bommelerwaard (Fig. 5), on January
1995, TIR images and normal colour images which were
prepared by Directie Noordzee (Ministry of public work-
department North Sea) has been taken to the Meetkundige
Dienst (Survey department). This office does the image
processing.
Before the actual processing of the images can be started, the
data is saved digitally in a workstation at the Meetkundige
Dienst. And after that further changes with image program
"ERDAS- Imagine" are possible.
The next step is the geometrically correction of the data because
the planes have irregular movements during the flight. This
implies that the data is transformed to a co-ordinate system.
The resulted data will be matched with an other geographic
information system. Correcting aeroplane data geometrically is
a time consuming business.
After importing and geometrically correcting the data, the
images are being analysed. Notice, the colour videotape that
N
A
Highway
N Railroad
BH] River
[] Town
0 10 20 Kilometers
Figure 5. The map of the Nieuwaal, Bommelerwaard
(Netherlands)
was taken from the crisis area, can be watched directly after the
flight with the help of an S-VHS video recorder, because the
video data is saved on S-VHS videotapes. This is fastest way to
get at an actual and recognisable overview of the critical areas
but that doesn't have clear information about seepage (Fig. 8).
The TIR videotape can also be watched directly with an S-VHS
video recorder, though the interpretation is somewhat more
difficult. The images that you can see contain temperature
difference depicted in grey colours, which make the landscape
less easy to recognise (Fig. 6).
The TIR images are adapted in such a way to show potential
places of seepage (Fig. 6 and 7). Because when the temperature
‘of the water is higher than the land's temperature, the water will
be depicted white while the land is clearly identifiable in darker
grey tints.
381
It has to be said that this method is only then useful, when a
temperature difference between land and water exists. In figure
7, the brightest areas in the down and middle of the picture
show the water in the inner slope of dike (seepage). This water
is warmer than soil (body of dike) and the water in the outer
slope of the dike (water in the river, right side of the picture), so
the seepage areas have the highest brightness in the picture.
The body of dike is colder than the water in the inner slope and
outer slope of dike, therefore it is shown with dark tone in the
picture in compression with the other parts. The water in the
river (in the outer slope of dike) is warmer than soil and colder
than seepage (right side of picture); thus it is shown with lower
brightness.
With the help of digital image processing, these video and
geometrically corrected TIR-strips of the same surroundings,
were combined by Fraikin et al. (1995) (Fig. 9). This
combination is based on the change of intensity of the video
image to the intensity of the TIR record. In this way the colour
and clarity of the original video image is stored but the contrast
is determined by the TIR image. The result shows an image in
which the qualities of video (overview and identification) are
combined with the qualities of TIR images (reproduction of
temperature differences, seepage).
Figure 6. Geometrically corrected TIR image of the dike at
Nieuwaal, Bommelerwaard (Fraikin et al., 1995)