)04
ase
but
ne
ath
to
ues
ted
| to
"ue
hat
ces
ne
Xes
; in
ner
llel
ner.
low
1 as
ion
International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Vol XXXV, Part B6. Istanbul 2004
TTS al
Figure 7. Two push broom views (forward and backward).
Another version shows a series of “line imaging events”. Each
event is shown by four lines only:
e À straight and horizontal line in the object space,
e Two imaging rays for the extreme points
e The sensor line.
In this case the flight path and the rotation angles are modelled
by a second order polynomial. There is no object shown and no
image.
‘.
K « » »\Chart1 / calculation / Shee | «| | P
B C D E F G
2 param Uo Vo Wo kap(gr) phifgr) om(ar)
3 3 ao 220 10 300 0 0 0
B 4 al 3 0 0 -0.3 0 0.4
|5 32 0 0 a 0.005 ü| -0004
6 C 150 sû: 60 smax: 120| imured:]3
Figure 8. Push broom imaging events and parameters
There were no macros made to handle the parameters in this
version, as the speed of changes in zero order, first order and
second order terms is incompatible. A better choice of the units
could probably overcome this problem, but there are much
more changes foreseen: It should become an imaging version
and also restitution with changed parameters should become
possible. The concepts and layouts are ready since some time,
but the time to implement it was not available so far. I hope to
be able to show it at the congress. The transformation from
object to image is not straight forward in that case, because the
orientation parameters to be used depend on the image line, in
which the point is imaged. This requires iterative calculation or
higher order rational polynoms. Iterative calculation with three
iterations will be used. This should give satisfactory results. To
allow all possible constellations, the restitution will make use of
concise formulas for the intersection of the rays such, that the
joining line of the resulting points on each light ray is
perpendicular to both light rays.
U; uU u 4
Viz E, ptt v, (4)
W. Ww. Ww,
1 2 1
f uy —iu, (v-w,—w-v) r=
Li=lv, -v (m-m-mue LV, -V,
0
1 745 (4 V, Yi 15) W : ET W
where U;, Vi, W; = object coordinates of the restituted point,
calculated from image i
Ui, Vj, W; = vector in image i from projection center to
image point in the object coordinate system
Unis Vois Woi = coordinates of projection center (i)
; = scale factors
i = index of the image (1 or 2)
OTHER GRAPHICS
Orbiting Satellite
35 4
-35
a
en 4
m
-15
m
a
-35
25 35
Figure 9. orbiting satellite and globe (showing The Netherlands)
This graphic shows a spherical globe and a circular satellite
orbit. The following parameters can be changed “continuously”
by macros: all viewing parameters, the radius of the globe and
its speed of rotation, the height and the inclination of the orbit,
the position of the satellite at time "zero", the (angular) speed of
the satellite, the swath (angle), the forward and the sideward
look angle, the “time”(in minutes).
When the time changes, then the globe rotates and the satellite
moves, both according to the speeds specified.