ES BT LL A FLARE Rae
Relation (1) shows that the shadow width grows with the
growing distance d and the obstacle elevation h what should
be taken into account when the terrain is analyzed. Model of
the obstacle and shadow from the Fig. 1. can be applied to
some area presented by means of digital model of the relief
elevation - DEM (Davis J.C., McCullagh M.J,, edit., 1975).
First, slope is calculated from DEM and aspect of every
DEM cell (Horn B.K.P., 1981). The following is the picture
of DEM for the considered area, Fig.2a, the elevation
histogram Fig.2b. The image of the slope for considered
terrain is shown on Fig.3a, and the histogram on Fig.3b.
Image of the aspect angles is shown in Fig4a, and the
corresponding histogram in the Fig.4b.
Figure 2a. DEM for the considered area. Black - minimum
elevation, white - high elevation. (Original DEM elevation
data are 16 bits, image on Fig.2a. shows limited range of
elevations).
Figure 3a. Image of the slopes of the terrain on Fig.2a. Black
- 0°, white - 64°. Streched intensity, compare histogram on
Fig. 3b.
SE OR ARR AIME EEE A tree A PONS naar EEE
Figureda. The aspects of the terrain in Fig.2a. Black - 0°
(Nord), white - 359^.
Histograms for Fig.2a, Fig3.a and Fig.4a are shown on next
page.
The possibility to enhance the terrain features causing the
shadows by the classification methods is analyzed. If slope
and DEM elevation are used as two sorts of data for
classification then the enhanced structure contributing most
to generating the shadows is obtained. This makes the
possibility to establish the existence and position of
geomorphologic structures causing the shadows without
either SAR images or SAR images simulation (based on
DEM). However, this is not enough because it does not say
anything about the loss. Therefore, criteria to enable this are
introduced in the next passage.
4. CRITERIA FOR THE DETERMINATION OF AN
AIRBORNE SAR ROUTE WITH MINIMUM LOSS
DUE TO SHADOWS
Data on aspects and slope enable the calculation of the
airspace around some considered area R, within which the
foreslopes and backslopes of all obstacles can be imaged.
The imaging can be from the other side of those parts which
cannot be imaged from the front side. The example of the
data for aspect and slope angles, for 5x5 cells of the upper
left part of the DEM Fig2a, is shown in Fig. 5.
+56 +32 +353 +331 314
a Er 4332
50:926 +359 +4
+23 26 +8 +355 +351
+48 42; 4355 . 347. +338
a
08 13.21 25 20
15 23 LÉ] 25 2
6 41 20 29
33.34 90.42 37
47 23 42 48 39
b
Figure 5. An example of the a) aspect and b) slope data,
for 5x5 cells in the upper left comer of the DEM from
Fig.2a.
512 Intemational Archives of Photogrammetry and Remote Sensing. Vol. XXXII, Part 7, Budapest, 1998