64 Prakt. Met. Sonderband 46 (2014)
4. SCHLUSSFOLGERUNGEN EINFLUS:
|
Es wurde die Probenpräparation mittels elektrolytischen Polierens mit jener des ERGEBN
Vibrationspolierens für die EBSD- Analyse von MHC miteinander verglichen. Alle H. Nitschke*”
Versuche mit Vibrationspolieren von MHC verursachten eine Zerrittung der Oberflache.
Diese Praparationsartekfakte spiegelten sich in der IPF- Darstellung der Mo- Matrix in se Bruker Na
Form von scheinbaren Orientierungsänderungen des gesinterten Materials wieder. Die Bundesar
besten Ergebnisse wurden durch elektrolytisches Polieren mit einer Lösung aus 12.5 vol%
H,SO, in Ethanol erzielt. Die optimale Polierzeit liegt bei 45 s.
ABSTRAC
REFERENZEN Anhand von z
Präparation fi
[1] Leichtfried, G.: “Powder Metallurgy Data, Refractory, Hard and Intermetallic pf Beisel
Materials”, Landolt-Bérnstein, 2000 Goldeinschiiis
[2] Plansee SE, “Molybdan-Hafnium-Kohlenstoff’, http://www.plansee.com/en/Materials- Beu gungsbild
Molybdenum-402.htm#MHC, Juni 2014 Für jedes Bei,
[3] Pohl, C., Schatte, J., Leitner, H.: "Metallographic characterization of the molybdenum anderen Werk
based alloy MHC by a color etching technique”, Journal of Alloys and Compounds,
77,2013, p. 63-69
[4] Pohl, C., Lang, D., Schatte, J., Leitner, H.: "Strain induced decomposition and
precipitation of carbides in a molybdenum-hafnium-carbon alloy”, Journal of Alloys 1. EINFUHE
and Compounds, 579, 2013, p. 422-431 :
[5] Raabe, D., Luecke, K.: "Rolling and annealing textures of bcc metals”, Material .
Science Forum, 157-162, 1994, p. 597-610 Beim ersten E
[6] Hünsche, I., Oertel, C. G., Tamm, R., Skrotzki, W., Knabl, W.: ”Microstructure and i cer Nähe d
texture development during recrystallization of rolled molybdenum sheets” Material I ickel. Kobalt
Science Forum, 467-470, 2004, p. 495-500 m zweiten B
[7] Primig, S., Leitner, H., Knabl, W., Lorich, A., Clemens, H., Stickler, R.: ”Textural unterschiediic
evolution during dynamic recovery and static recrystallization of molybdenum”, Dotallografisc
Metallurgical and Materials Transactions A, 43, 2012, p. 4794-4805 erformunger
[8] Schwartz, A. J., Kumar, M., Adams, B.L., Field, D. P.: Electron Backscatter werden, dass
Diffraction in Material Science”, Springer Science + Business Media, 2009
[9] Michalska, J., Chmiela, B.:"Phase analysis in duplex stainless: comparison of EBSD
and quantitative metallography methods”, Materials Science and Engineering, 55, 2. GIBEON
2014, doi:10.1088/1757-899X/55/1/012010
[10] Manhard, A., Mattern, G. Balden, M.: "A Step-By-Step Analysis of the Polishing Der Meteorit
Process for Tungsten Specimens”, Prakt. Metallographie, 50, 2013, p. 5-15 übergeben. N
[11] Vander Voort, G. F.: "Metallographic Preparation for Electron Backscattered nicht bekann
Diffraction”, Buehler Tech Note, 5 (2), 2010, p. 1-8 deutiiches |
[12] Ryan, N. E.: “Orientation and habit plane relationships for carbide and nitride Widmannstatt
precipitates in molybdenum”, Metallography, 2, 1968, p. 195-220 sein können.
massive Prä
unmöglich ma
Der EBSD
Réntgenspeki