The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences. Vol. XXXVII. Part B5. Beijing 2008
752
and forward intersection. Finally, the aerial triangulated high
resolution images are also used for obtaining precise spatial
information, such as building outlines and large scale mapping.
2.2 Low altitude remote sensing system with unmanned
airship
With several years’ research in corporation with another group,
low altitude remote sensing system based on unmanned airship
is developed. The unmanned airship automatically flies
according to predefined flight routes under controlment of
autopilot system. Hardware of the remote sensing system is
composed of unmanned airship, autopilot system, task payload,
wireless communication equipment, ground control station and
optional GPS reference station, as shown in figure 1.
|“GPS Ref. ]_ _
I Station I
Wireless
Communication
Figure 1. Hardware of the low altitude remote sensing system
2.3 Data acquisition
The unmanned airship can automatically fly according to the
predefined flight routes under controlment of autopilot system.
Low altitude aerial image sequences are taken by the
aforenamed non-metric digital camera. The camera is fixed on
three axes stabilising platform, which can keep the camera
orientation more stable than the airship itself while flying.
Low altitude image sequences for experiments are taken with
the developed remote sensing system in Nov. 2007. Wind speed
is about 7m/sec during image data acquisition. Ground coverage
of the test area is about 700m*700m. The flying height of
unmanned airship above the ground is about 150m. 24mm lens
is mounted on the Kodak Pro SLR Camera. So ground coverage
of each image is 150m*225m, and ground sample distance
(GSD) of images is about 0.05m. Predefined distance between
two exposure points is 28m, and distance between two strips is
50m, i.e. the forward overlap and side overlap is 80% and 75%
respectively. Totally 299 images of 13 strips are taken with the
unmanned airship. Figure 2 shows the planar position of camera
center of all images. Caused by wind sensitivity characteristics
and imperfection of the three axes platform, the maximum bias
from exposure point to predefined flying strip is about 5m,
height maintaining accuracy when compared with predefined
flying height is better than 10m, orientation variations between
adjacent images are about 5 degrees. Five typical stereo images
of one strip are shown in figure 3. As can be seen, the overlap
and camera orientation are stable and fitted with that of the
predefined ones.
3800
3700
3600
♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦
♦ ♦♦♦♦♦♦♦
**♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦
♦ ♦♦♦♦♦♦♦♦♦♦♦♦ ♦♦♦♦♦♦♦♦♦♦
The autopilot system is composed of computer, GPS receiver,
MEMS gyroscope, barometric altimeter, airspeed indicator and
flying control software. The autopilot system collects real time
information such as position and speed of the unmanned airship
and automatically controls the unmanned airship according to
predefined flying routes. The task payload consists of digital
camera, video camera and three axes stabilising platform on
which the two cameras fixed on. The platform can automatically
keep the predefined camera orientation against the swing or
oscillation of unmanned airship. The dashed arrows in figure 1
indicate control signals and information transformation from the
ground station to autopilot system by wireless communication
equipment, while bold arrows indicate the information and data
transformation (e.g. real time video) from the autopilot system
and task payload to ground station.
3500
3400
3300
3200
♦ ♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦
♦ ♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦
♦ ♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦
♦ ♦♦♦♦♦♦ ♦♦♦♦♦♦♦♦*♦♦♦♦♦♦♦
♦ ♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦
♦ ♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦♦
3100 . . * * ‘ * <
7550 7650 7750 7850 7950 8050 8150 8250
Figure 2. Planar position of exposure points
Technical parameters of the low altitude remote sensing system
are listed in the following: length of the airship is 13.2m,
cruising speed is about 30~40km/h, maximum payload capacity
is about 15kg, accuracy of flying tracks against the predefined
routes is about 5m, posture maintaining accuracy of the three
axes stabilising platform is about 3 degrees in roll and pitch and
5 degrees in yaw. The non-metric camera fixed on the platform
is Kodak Pro SLR with 4500pixels*3000pixels image format
and 0.008mm pixel size.
Figure 3. Stereo images taken by the remote sensing system
To fully evaluate the precision of image sequences acquired by
the low altitude remote sensing system, totally 64 ground points