914
The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences. Vol. XXXVII. Part B5. Beijing 2008
Figure 9 Satellite availability along the surveyed track
In these areas the final accuracy can decrease and for this
reason some ad hoc and a posteriori survey based on different
approaches such as the traditional one , has to be performed. In
these area these surveys can be used not only for checking but
also to improve the final precision of the MMS survey. These
surveys, if referred to the same reference system of the
GPS/RTK survey, can be used to define, locally, the reference
frame. This determination can be used to adjust the survey
performed by the MMS.
Therefore, the following working phases have been identified:
1 - Surveying of some points using GPS and total station on
points identified on images, at the beginning and at the end of
the track, were the navigation is relied just to the IMU sensor.
2 -Transformation parameter determination between the two
datasets (of the MMS and of the local survey) for the two areas
using least square approach.
3 - Application of transformation parameter to the MMS survey
from the beginning to the end of the considered track.
For the point 2 it is necessary to choose the transformation
typology, for example a 6 parameter transformation (roto-
translation) can be adopted.
For the step 3 it is necessary to evaluate the strategy (time
dependent or space dependent) that permits to estimate the
appropriate transformation parameters for any areas along the
considered track.
This part of the work is still in progress and it is fundamental in
this study to take into account also the drift characteristics of
the used sensor.
5. CONCLUSION AND REMARKS
MMS constitute a useful tool for acquire high detailed survey
combining different sensors for positioning and survey. This
methodology was applied for the preliminary survey for the
project of the first lag of the Bologna underground. The
complete track start from low density area (good for satellite
navigation) and across the city centre, where the street width is
reduced and the presence of high buildings create obstacles for
the sky visibility. In these conditions the positioning system
relies only on IMU sensor which cannot maintain a good
trajectory for long distances.
Some considerations have been made on the repeatability of the
survey. Two independent - forward and backward - surveys on
the same areas have been compared and the maximum value of
the discrepancies was contained in about ±20 cm. The
discrepancies in height are quite the same as in north and east
component.
To check the accuracy of the results obtained by the MMS
systems, some independent topographical surveys have been
performed, by using mainly GPS-RTK technique. In these four
areas, points well recognizable in the images have been chosen
and surveyed, to compare the absolute positions and the
photogrammetric measurements.
The mean value of the r.m.s has been of 10 cm in the north and
east component, and 5-6 cm in the height.
These results have been obtained in areas with good sky
visibility.
In order to reduce this problem, data acquired by ‘external’
surveys can be used not only for a quality check, but also to
determine transformation parameters along the track. These
latter parameters can be used to correct the MMS trajectory
between two lacks of GPS reception . These problems are the
subjects of the follow-up study.
REFERENCES
Barbarella M., Gandolfi S., 2007. Utilizzo della SmartStation
Leica per il rilievo di punti non stazionabili, Atti 11 Conferenza
nazionale ASITA, Torino 6-9 novembre , pp.255-260.
Barbarella M., Gordini C., 2006. Kinematic GPS survey as
validation of LIDAR strips accuracy , Annals of Geophysics,
Vol. 49, n.l, pp 147-159, February .
Gandolfi S., Forlani G., 2007. Catasto Stradale, Mobile
Mapping e Navigazione Geodetica nelle Reti di Stazioni
Permanent. Geomatics Workbooks, “I servizi di
Posizionamento satellitare per l'e-govemment” vol. 7, pp. 167 -
186.
Goodall C., Syed Z., El-Sheimy N., 2006. Improving INS/GPS
Navigation Accuracy through Compensation of Kalman Filter
Errors. VTC Fall 2006: 1-5
Gordini C., Abbondanza C., Barbarella M., 2007. GNSS
network real time positioning: testing procedure to evaluate the
accuracy of a geodetic moving antenna. Mobile Mapping
Symposium 2007, 28th May - 1st June, Padua, Italy
Nassar S, Schwarz Kp, El-Sheimy N, Noureldin A., 2004. -
Modeling inertial sensor errors using autoregressive(AR)
models. Navigation(Washington, DC), 2004
Niu X, El-Sheimy N, 2005. The Development of a Low-cost
MEMS IMU/GPS Navigation System for Land Vehicles Using
Auxiliary Velocity Updates in the Body Frame. Proceedings of
the ION GNSS, September, 2005
Schwarz K.P., El-Sheimy N., 2004. Mobile Mapping Systems -
State of The Art and Future Trends, IAPRS, Vol.XXXV, part
B5.