EXPLANATION OF THE PLATES.
379
11, v v, Are the exhaustion slide facings or back plates, the apertures through which
correspond, in like manner, with those of the nozles 3 and 4.
The four back plates r, s, t, v, are distinct from the casings, and are fixed in the
boxes or recesses m, m", n, n of the slide casings, by folding wedges or keys, so that
r r, s s have their backs against the cylinder, while 11, v v present their faces to the
same, their backs being wedged to projections or flanches adapted thereto, in the
recesses n, n.
To insure perfect joints, a plain caulking space is left at the bottom and back of
each slide-face, while the edges, which fit the casing at the face, have dovetail
portions removed so as to permit the insertion of soft or elastic packing, which,
with that beneath and at the back, completely surrounds the aperture and renders
all tight.
Facility is afforded of removing either back plate when requisite, by driving back
the folding wedges or keys, which keep them firmly in place, this dovetail form of
the edge permitting the facings to be readily detached from the packing after being
pressed by the wedges.
w, x,y, z, Are four slide valves, of rectangular figure, receiving their motion from
rods or spills passing through the stuffing boxes 5, 6, 7, 8.
The valves w, x are the steam slides, having their backs always presented to the
steam from the boiler, which maintains them in close contact with the faces of the
back plates r r, s s.
The valves w, x, it will be seen, are connected to their rods or spills by knuckle
joints, so as to permit perfect freedom of motion off their facings, independently of
the rods. By this contrivance, water carried over from the boilers into the cylinder,
is forced back by the piston into the steam pipe ti, till drawn off by cocks fitted at
the bottom for such purpose; thus obviating the risk of accident from its accumulation,
and dispensing at the same time with the necessity for escape or discharge valves.
The backs of the exhaustion valves y, z, being alternately submitted to the pres
sure of the steam on the descent and ascent of the piston, while their faces are pre
sented to the condenser, it will be observed that perfect contact of the slides with
their back plates 11, v v will ensue.
Thus the four slides w, x, y, z are caused to operate without packing, and with
out being submitted to greater friction than that due to the simple pressure of the
steam.