LOCOMOTIVE ENGINE.
447
slides and levers being moved to the right position by means of two starting handles
fixed on to the fire-box, and connected by rods and levers with the two weigh-
bars, and these starting levers are always moving with the slides. This plan
is inferior to the other with the forked eccentric rods, as the slides have to be
set by the starting handles, as well as the eccentrics reversed, in order to reverse the
engine; though when the engine is running, the first is not required, but a con
siderable strain is then caused by the eccentric rods suddenly catching hold of the pins
and bringing them into motion. The starting handles are used to enable the engine
to be moved very steadily or for a small distance by working the slides by hand,
the eccentrics being thrown out of gear; but a good regulator renders them un
necessary for this purpose, as the steam can be admitted very gradually to the
cylinders. Considerable friction is also caused by their being continually in motion
with the slides, and to avoid this, another handle has been added in some cases,
by means of which they can be thrown out of gear when not required; but that
adds to the complexity.
The plan of driving the slides that has hitherto been most universally adopted,
and is still much used, is by means of two eccentrics only, fixed together at right
angles to each other, and placed loose upon the centre of the cranked axle; their
rods being connected with the weigh-bars, as in the other plans ; and a driver with a
projecting stud is fixed on the axle on each side, just clearing the eccentrics, a hole
being made in each side of the eccentrics to fit the studs. The eccentrics can be
shifted along the axle to either side by means of a lever, to make the stud in the
driver on that side drop into the hole in the eccentric when it comes opposite to it
in revolving, and cause the eccentric to turn with the axle and work the slides.
The stud of the other driver is put on the opposite side of the axle to the corre
sponding hole in the eccentric; so that when the eccentrics are shifted to the other
side by the lever, they have to stop for half a revolution before that driver catches
hold of them, and are then fixed exactly opposite to their former position, and
reverse the engine; in their intermediate position, when they touch neither of the
drivers, they are stationary and cease to work the slides. This plan is inferior to
those with four eccentrics, as it is not so certain in its action, and does not keep in
order so well.
Working of Slides and Piston.—As the slides are worked by eccentrics, they
are not suddenly reversed in position at the end of each stroke, in order to let the
steam on to the other side of the piston, and keep the steam port full open,
throughout the stroke; but are always in motion, and commence returning as soon
as they have arrived at the end of their stroke. From this cause they are obliged