12
az nig = where n, takes the values 1, 2, 3, 4, 5 depending on radius.
g = the y-coordinate for point 51 in the grid.
1.2 A complete example of a projector test.
In the tables below the complete procedure for a projector test, base zero,
is demonstrated.
Table 1 Form for the determination of the original coordinate errors
(discrepancies) from measured and given data (x- and y-coordi-
nates).
Table 2 Form for the computation and graphical demonstration of the
radial distortion.
Table 3 Form for the computation of the corrections to the six elements
of orientation and of the standard error of unit weight of the
image coordinate measurements. Combination of thirteen points.
Radius of the circle 200 mm.
Table 4 Form for the computation of the corrections to the six elements
of orientation and of the standard error of unit weight of the
image coordinate measurements. Combination of five points.
Radius of the circle 200 V2 mm.
Table 5 Results of the computations in a high speed electronic computer
(Facit EDB). The following data are demonstrated: radial
distortion (for different radii in the projection plane, image plane
and for c=150 mm ), standard error of unit weight of the coordinate
measurements ior different radii (in the projection plane) and
corrections to the six elements of orientation.
Table 6 Results of the computations in Facit EDB. Residual corrections
to the coordinates in the projection plane, image plane and for
c=150 mm.
TI TNA LT ae
Mmi irte Vires
Divi:
Stoc]
RN mte eom
Sabin Shalini dish