Al-Hanbali, Nedal
REFERENCES
Al-Hanbali, N. N. (1994). "Demonstration: Laser Scanning System," The Second Workshop of the Dynamic Alignment
Project, Dept. of Geomatics Eng., The University of Calgary, Calgary, Alberta, November 18, 3pp.
Al-Hanbali, N. N., and Teskey, W. F. (1994). "Three-Dimensional Dynamic Deformation Monitoring using a Laser
Scanning System," SPIE Conference, Videometrics III, Boston, Massachusetts, November 2-4, Vol. 2350, pp. 83-92.
Al-Hanbali, N. N. and N. St. Laurent (1995). "Demonstration: Laser Scanning System," The Third Workshop of the
Dynamic Alignment Project, Dept. of Geomatics Eng., The University of Calgary, Calgary, Alberta, November 18, 3pp.
Al-Hanbali, N. N. (1998) "Assessment of a Laser Scanning System for Deformation Monitoring Applications," Ph.D.
Thesis, 214 pp., Department of Geomatics Engineering, The University of Calgary, Calgary, 1998.
Al-Hanbali, N. N., S. El-Hakim, W.F. Teskey, M. A. Chapman, J, A-Beraldin, R.S. Radovanovic, M. R. Resheidat,
(1999), * Calibration and Testing Results of a Laser Scanning System for Deformation Measurements”, CMSC99
(Coordinate Measurement Systems Committee) Conference, Seattle, July 26-30, pp18
Beraldin, J.-A., Baribeau, R., Rioux, M., Blais, F. and Godin, G. (1992). "Model-Based Calibration of a Range
Camera," Proceedings of the Eleventh IAPR International Conference on Pattern Recognition, The Hague, The
Netherlands, August 30-September 3, pp. 167-193.
Beraldin, J.-A., El-Hakim, S. F. and Cournoyor, L. (1993). "Practical Range Camera Calibration," SPIE Conference,
Videometrics II, Boston, Massachusetts, September 9-10, Vol. 2067, pp. 21-31.
Beraldin, J.-A., Rioux, M., Blais, F., Godin, G. and Baribeau, R. (1994). "Calibration of an Auto-synchronized Range
Camera with Oblique Planes and Collinearity Equation Fitting," NRC Report, ERB-1041, National Research Council of
Canada, Institute for Information Technology, Ottawa, Ontario, November, 25pp.
Blais, B., Rioux, M. and Maclean, S. G. (1991). "Intelligent, Variable Resolution Laser Scanner for the Space Vision
System," Proceedings of the International Society for Optical Engineering (SPIE), Orlando, Florida, April 3-5, Vol.
1482, pp. 473-479.
Blais, F., Beraldin, J.-A., Rioux, M., Couvillon, R. A. and Maclean, S. G. (1993). "Development of a Real-Time
Tracking Laser Range Scanner for Space Applications," Workshop on Computer Vision for Space Applications,
Antibes, France, September 22-24, pp. 161-171.
NRC, Institute for Information Technology, Annual Report 1993/1994, National Research Council of Canada, Ottawa,
Canada, ISSN 1183-9082.
Obidowski, R. M., Teskey, W. F., and Gaidadjiev R. (1995). "Integration of Sensors with Videometry for industrial
Machinery Monitoring SPIE Conference, Videometrics IV, Philadelphia, Pennsylvania, October 23-26, Vol. 2598, pp.
295-304.
Rioux, M. (1984). "Laser Range Finder Based on Synchronized Scanners," Applied Optics, November, Vol. 23, No. 21,
pp. 3837-3844.
Teskey, W. F., Obidowski, R. M. and Al-Hanbali. N. N. (1994). "Measurements of Machinery Deformations by High-
Precision Survey methods," Journal of Surveying and Land Information Systems, Vo.54, No.1, pp. 1-10.
Teskey, W.F., Lovse, J.W., and Al-Hanbali, N.N. (1995), Deformation, Alignment and Vibration in a Large Turbine-
Generator Set, Journal of Surveying Engineering, Vol. 122, No. 2, pp. 65-79.
16 International Archives of Photogrammetry and Remote Sensing. Vol. XXXIII, Part B5. Amsterdam 2000.
KEY V
ABSTR
Mobile
Whene
area an
displaye
multiple
Due to :
investig
using pr
was pro
of the te
1- INT
In 1989,
developr
airplanes
during p
The Uni
the same
technolo
The mai
photogra
campus.
horizont:
system. ]
technique
check po
Image cc
The accu
program
Bundle a
photogra]
points in
these bun
distances
adjustmei
images. T
way.