International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Vol XXXV, Part B5. Istanbul 2004 
  
  
   
   
    
   
   
    
   
   
   
     
   
   
   
    
  
  
  
  
For special areas requiring precise drawing, Image Resampling 
was applied and Image Matching procedure was carried out. 
For images completing matching procedure, precise drawing on 
an object was conducted using 3D  Digitizing Module 
connected to MicroStation. For digital images, orientation, 
image resampling and image matching were performed and 
then, 3D precise drawing for total 36 models were conducted 
  
    
QD View Jocls Mods Window Hep — 
iwisenae iiw T 
  
  
  
  
  
  
  
  
5 ETES TE 2 3i 
7 t "m eu ong 3 
RES EH = Hi ; XE pum As Pa TT 
Figure 6 digital Drawing Screen for Dimensional Images 
using 3D digitizing module connected to MicroStation, GIS 
processing software. 
Orientation procedure in the process to get digital data 
consists of interior orientation, relative orientation and absolute 
Table 1 Results of Interior and Relative Orientation 
# ber ; # ASE 
"Transform Matrix Acauracy Fair RMSE 
100006 
DIS 
00079 
00127 
: 1002 
000087 | 0967 | M 5 10107 
coordinates related to interior orientation for total 36 models 
were 0.001/1:10.01/, and most models showed deviation less 
than 0.0050. average standard error was 0.0025 10.036! /, with 
slight variations. However, all models achieved orientation 
with accuracy below predefined limit. Table 1 explains parts of 
results for interior and relative orientation. Figure 6 describes 
working screen for digital drawings on main 
  
EER E 
iet 5 (ser telp 
enred 
  
  
rm eee e AR 
Figure 7 3D digital Drawing Results 
tower sectors on the front plane of an object and Figure 7 
illustrates the results of digital drawing using ISO View method 
among display methods. And that formed 3D drawing for the 
Model 
Transform Matrix # RMSE 
00064 
0014829 0997106 
0.0018 
-0007657 099739 
  
Figure 8 Combined digital map of the Front Plane of an Object 
orientation determining 3D space, and this procedure has a 
substantial influence on accuracy of digital data. This study set 
the accuracy limit of interior orientation and relative orientation 
within 0.01. and 0.1" apiece. The accuracy of X and Y 
     
front plane of an object as mixing performances of digital 
drawing using performances of reference points acquired on the 
same coordinates system, which used ISO View method among 
display methods. 
Inter 
Per 
meas 
Micr 
perfc 
front 
Ort 
show