and
e as
2 the
s the
hese
ap of
S for
| the
nine
new
S are
|
LÍ
ound
EE EELTTT
These forms exist for each of the 19 criterion. To describe
the environmental situation for each criterion a description
and rating will be carried out with these rules.
3 TECHNICAL TRANSFORMATION INTO A GIS
3.1 The program UQUADO
That under chapter 2 methodically developed concept for
the environmental estimation should be implemented on a
workstation computer under the Geographic Information
System Arc/Info. The program to be developed should
offer thereby possibilities, to update and complete the
valid program version any time in case of new knowledge
from the technical part as well as possible changes of
existing legal basic conditions. In addition it should
consist of an user-friendly graphical interface and give
also users without Arc/Info knowledge the possibility, to
work with the program.
From these requirements the program UQUADO
emerged, which has been programmed in the Macro
Language AML (Arc Macro Language) under Arc/Info.
The task of UQUADO is, to associate the units of volume
to environmental qualities with the help of the algorithms
from the forms and to visualise these so-called profiles of
environmental quality, which can be given out
subsequently on a printer or plotter.
Arc/Info is a vector GIS and has to be chosen because it
has powerful tools in the area of environmental questions.
It has good opportunities of overlays and it is independent
of the hardware. Different data bases can be used to
store the thematic information (e.g. INFORMIX,
ORACLE). There are tools for TIN (Triangulated irregular
network), for network analysis and for grid operations, to
revise raster images, which can be used as background
information.
Arc/Info has a powerful programming language (AML) so
that it is possible to create automated processes, menus
and forms masks.
3.2 System requirements
UQUADO has been developed on a SUN Sparcstation 2
with 32 MB RAM under OpenWindows 3.0. Because of
the large data a hard disk capacity not fewer than 1
Gigabyte is to be recommended. Because of the
tremendous drop-off in prices the standards change
herewith however constantly. Computers with larger RAM
are likewise now already on the market.
Beside the usual hardware a digitizer of the size DIN A1
should be available for the data entry, furthermore a
Laser printer (postscript) for the output of the profiles of
environmental quality. A CD ROM drive belongs
nowadays already to the standard of a computer. A
Streamer, Exabyte or DAT-drive for the data backup
should not be missing.
Since no system commands have been used, but all
program parts consist only of AML-commands, an
installation on other platforms is possible without further
shift, which was already utilised in the practice, since the
city of Dortmund uses IBM computers.
3.3 Data preparation
The land use map of the ,Kommunalverbandes
Ruhrgebiet“ (KVR) serves as data base, from which the
map of units of volume has been derived. All the other
information (e.g. map of dangerous waste from the past,
Soils map etc.) have been stored first of all in separate
layers (Fig. 5). The important thing is here, whether it
concerns of points, lines or area information, since points
and areas can not be managed under Arc/Info in common
layers.
Subsequently the individual layers have been overlaid
with the units of volume map. This has the advantage,
that the information are directly available to the units of
volume. In contrast it has the disadvantage, that at a
change of the map of units of volume or of one layer the
overlays have to be calculated again. Although for this
operation AML-routines are available, the time element is
not to be underestimated, meanwhile the System is not
available to the user.
Units of volume
AREA PERIMETER DEUSEN-ID RE
10433.22 13654.33 1 W1
5004.34 8433.66 2 V2
Soils
AREA PERIMETER BODTYP
50345.62 17544.44 L31
2003.34 6500.55 G2
Dangerous waste from the past
AREA PERIMETER ALTLAST-ID ALTLAST
8002.34 6654.33 1 A
3050.64 1433.66 2 A
Figure 5: Layers in UQUADO
525
International Archives of Photogrammetry and Remote Sensing. Vol. XXXI, Part B4. Vienna 1996