130 Prakt. Met. Sonderband 46 (2014)
REFERENCES DAMA:
. N VON Z'
[1] Goto, H., K.-I. Miyazawa and T. Kadoya: “Effect of the Composition of Oxide on the
Reaction between Oxide and Sulfur during Soldification of Steels”, ISIJ International, STAHL
35, 1994, p.1477.
[2] Goto, H., K.-I. Miyazawa, W. Yamada and K. Tanaka: “Effect of Cooling Rate on S. Strobl,
Composition of Oxides Precipitated during Solidification of Steels”, ISIJ International,
35, 1995, p.708. Technisch
[3] Ohkita, S. and Y. Horii: “Recent Developments in Controlling the Microstructure and Getreiden
Properties of Low Alloy Steel Weld Metals”, ISIJ International, 35, 1995, p.1170.
[4] Sarma, D.S., A.V. Karasev and P.G. Jonsson: “On the Role of Non-metallic Inclusions
in the Nucleation of Acicular Ferrite in Steels”, ISIJ International, 49, 2009, p.1063.
[5] Bernhard, C., S.Schider, A. Sormann, G. Xia and S. llie: “Erste Ergebnisse des neuen ABSTR/
Hochtemperatur-Konfokalmikroskops am Lehrstuhl fiir Metallurgie®, Berg- und
Hittenmannische Monatshefte, 156, 2011, p.161. Das Schr
[6] Komizo, Y., H. Terasaki, M. Yonemura and T. Osuki: “Development of in situ forderung
microstructure observation techniques in welding”, Welding in the World, 52, 2008, Die Herste
p.56. Blechen ¢
[7] Zhang, D., H. Terasaki and Y. Komizo: “In situ observation of phase transformation in geschmie
Fe-0.15C binary alloy”, Journal of Alloys and Compounds, 484, 2009, p.929. werden, w
[8] Zhang, D., H. Terasaki and Y. Komizo: “In situ observation of the formation of Gegensta
intragranular acicular ferrite at non-metallic inclusions in C-Mn steel”. Acta Materialia. von Eiser
58, 2010, p.1369. K110 mit |
[9] Zhang, D., Y. Shintaku, S. Suzuki and Y. Komizo: “In situ Observation of Phase Anordnun
Transformation in Low-Carbon Boron-Treated Steels”, Metallurgical and Materials Im zweite
Transactions A, 43, 2012, p.447. Die K600
[10]Zhang, D., Y. Shintaku, S. Suzuki and Y. Komizo: “Effect of cooling rate on phase sowie Re:
transformation in the low-carbon boron-treated steel”, Journal of Material Science, 47, Durch ve
2012, p.5524. erfolgreicl
[11]Zhang, X. and Y. Komizo: “In Situ Investigation of the Allotropic Transformation in
Iron”, Steel Research International, 84, 2013, p.751.
[12]Michelic, S.K., D. Loder, G. Arth and C. Bernhard: “Experimental study on the 1. EINLL
formation of non-metallic inclusions acting as nuclei for acicular ferrite in HSLA steels
through specific deoxidation practice and defined cooling conditions”, Materials Das Schn
Science Forum, 783-786, 2014, p.1079. Formgebt
[13]Presoly, P., R. Pierer and C. Bernhard: “Linking up of HT-LSCM and DSC Damasze!
measurements to characterize phase diagrams of steels”, Materials Science and mittels ©
Engineering, 33, 2012, p.1. Endprodu
[14]Griesser, S. and R. Dippenaar: “Enhanced Concentric Solidification Technique for Dehnung,
High-Temperature Laser-Scanning Confocal Microscopy”, ISIJ International, 54, 2014, Die Dam:
p.533. unterschie
[15]ASTM: „Annual Book of ASTM Standards: Section 3, Metals Test Methods and Stahiblecl
Analytical Procedures”, Vol. 03.01, E 562 - 11 Standard Test Methods for Determining zerschnitt
Volume Fraction by Manual Point Count. nach gew
[16]ASTM: ,Annual Book of ASTM Standards: Section 3, Metals Test Methods and entstehen
Analytical Procedures”, Vol. 03.01, E 112 - 95 Standard Test Methods for Determining Schritt ste
Average Grain Size. Gegensta
eine Kon
hochlegie
mit Hilfe c