312 Prakt. Met. Sonderband 46 (2014)
REFERENCES
[1]G.A. Roberts, G. Krauss, R. Kennedy: Tool Steels, 5" ed., ASM International, Material
Park, OH, 1998.
[2]Product brochure: UDDEHOLM COLDWORK TOOLING, Edition 8, 08.2012 published
on www.uddeholm.com.
[3]Jorgen Andersson, Secondary hardening in some low chromium hotwork tool steel
(doctoral dissertation), Department of Applied Physics, Chalmers University of
Technology, Sweden 2011, ISBN: 978-91-7385-508-2.
[4]Greta Lindwall, Multicomponent diffusional reactions in tool steel (doctoral dissertation),
KTH industrial engineering and management, Sweden, 2012, ISBN: 978-91-705-504-0.
[5]Muneo Yaso, Shuhei Hayashi, Shigekazu Morito, Takuya Ohba, Kunichika Kubota and
Kouji Murakami, Characteristics of Retained Austenite in quenched High C-High Cr alloy
steels, Mat. Transactions, vol.50 (2009), no.2, pp 275-279.
[6]H:KD:H: Bhadeshia, Bainite in Steels, 2nd ed., IOM community, London, 2001.
[71Christoph Lerchbacher, Silvia zinner, Herald Leitner, Direct or Indirect: Influence of type
of retained austenite decomposition during tempering on the toughness of a hot-work tool
steel, Material Science and Eng. A, 564 (2013), 163-168.
[8]Henrik Jesperson, Toughness of tool steel (doctorial disertation), Uppsala University,
Sweden, 2011, ISBN:978-91-506-2191-4.
[9]Akre J.; Danoix, F.; Leitner, H.; Auger, P.: The morphology of secondary-hardening
carbides in a martensitic steel at peak hardness by 3DFIM, Ultramicroscopy, 109(2009),
no.5, pp 518-523.
[10]L. Andersson et.al, Torsten H. (ed.), Pelle O. (ed.), Eva T. (ed.), Steel and its heat
treat- A handbook, Swerea IVF, Sweden, 2012.
[11]C.Lerchbacher, S.Zinner, H.Leitner, Retained Austenite Decomposition and Carbide
Formation During Tempering a Hot-Work Tool Steel X38CrMoVs-1Studied by Dilatometry
and Atom Probe Tomography, Metall.Mater.Trans.A, vol 43 (2012), Issue 13, pp:4989-
4998.
[12]Ch.Li, X.Wu, Ch. Xie, H.Wang, An investigation of heat treatment of Cr8 type tool
steel, Proceedings of the 9" international tooling conference, Montanuniversity Leoban,
11-14 september, 2012.
[13]H. Berns, Comparison of wear resistant MMC and white cast iron, Wear, 254 (2003).
47-54
