International cooperation and technology transfer

Fras, Mojca Kosmatin

Bibliographic data

Monograph

Persistent identifier:: 856490555

Author:: Fras, Mojca Kosmatin

Title:: International cooperation and technology transfer

Sub title:: Ljubljana, Slovenia, February 2 - 5, 2000 : proceedings of the workshop

Scope:: VI, 163 Seiten

Year of publication:: 2000

Place of publication:: London

Publisher of the original:: RICS Books

Identifier (digital):: 856490555

Illustration:: Illustrationen, Diagramme

Language:: English

Usage licence:: Attribution 4.0 International (CC BY 4.0)

Publisher of the digital copy:: Technische Informationsbibliothek Hannover

Place of publication of the digital copy:: Hannover

Year of publication of the original:: 2016

Document type:: Monograph

Collection:: Earth sciences

Chapter

Title:: AEROPHOTOGRAMMETRIC IMAGES IN A QUALITY REGIMEN. Lorenzo Leone, Giuseppe Mussumeci, Giuseppe Pulvirenti

Document type:: Monograph

Structure type:: Chapter

109 • Documented procedure for the verification of the photogrammetric coverage and the scale of the photograms; • Documented procedure relative to the A.T. phase and topographic measurements • Documented procedures relative to the modalities of copying, with particular regard for the classification and interpretation of the elements, phase completion times and the checks to be carried out on the areas that are not directly visible; • Documented procedures relative to the land survey stage, with particular regard for the instrumental campaigns of the elements of the territory that are not visible in the photographs; sample verification of the metric standards; • Documented procedures relative to the phase of electronic elaboration of the maps; • Instrument maintenance to assure a continued process capacity. • Check of conformity of the quality plan; Naturally, documented procedures must be actuated for the registration of the checks carried out during the process to be correlated to the finished product and its destination. 3.5 Finished product The finished product is the numeric map, or geographical data base, its fundamental property is responding exactly to the morphological and anthropical situation of the surveyed area. Therefore, even if the production cycle finishes with the consignment of the map and the information in electronic form, the supplier must guarantee the results above all the technical-administrative verification and testing carried out at the end to verify the quality of the operations carried out. 3.6. Contract re-examination With reference to the product, and to the tests carried out to verify that it satisfies the required requisites, the contract re-examination is aimed at verifying that: - the final characteristics of the product are “adequately defined and documented”. - the requirements conform to what is offered; - the supplier is able to satisfy the requisites indicated in the contract and can guarantee the tests required. 3.7. Preventative and corrective actions The verification of the conformity, also following complaints by the client, activates the process of identifying the possible preventative/corrective actions by which the cause can be eliminated and the repetition of analogous situations avoided. These procedures include complaint management, identification of the cause, definition of preventative/corrective actions and the verification of the efficacy of corrective actions. 4. CONCLUSIONS The production of “quality” numeric maps allows, through the programmed actuation of documented procedures in the various phases of production, to guarantee the desired characteristics. The study of the ISO 9000 legislation and the analysis of the production cycle of the “map” product/service have allowed the evaluation of the fundamental aspects for the creation of a “Quality Manuel” for the aerophotogrammetric based cartographic production. In this paper our attention has been focused on the aspects of the production cycle that have a direct influence on the quality of the product, showing, in particular, the importance of defining control procedures for the complex phases of design, of verifying properties and accepting in-coming materials, as well as the production cycle. It must be said, furthermore, that in the area of a Quality system, the training of staff and the prevention of accidents at work play an important role. Bibliography ISO-TAG4/WG3, IEC, BPM, OIML, IUPAC, IUPAP, IFCC, 1993. “Guide to the expression of uncertainty in measurement” ISO 9000-1, 1994 “Norme di gestione per la qualità e di assicurazione della qualità” ISO 9001, 1994 “Sistemi Qualità Modello per l’assicurazione della qualità nella progettazione, sviluppo, fabbricazione, installazione ed assistenza”. ISO 9002, 1994 “Sistemi Qualità - Modello per l’assicurazione della qualità nella fabbricazione, installazione ed assistenza”, dicembre 1994. Gaietto R., Spalla A., 1994 “Lezioni di Topografia”, Ed CLUP, Pavia, 1994 G. Mattana, 1996 “Il congresso 1995 della Organizzazione Europea per la Qualità EOQ Qualità n°1/96, Italia. GISFORM-ANIAF, 1999 “Progetto RASTER” , www. gisform.it.

Access restriction

Copyright

fullscreen: International cooperation and technology transfer

Monograph

Chapter

Table of contents

Cite and reuse

Monograph

Chapter

Image

Image fragment

Citation links

Citation recommendation