Full text: Mesures physiques et signatures en télédétection

546 
6 - VALIDATION OF THE ATSR-IK ALGORITHM 
To validate this algorithm, it has been applied on another set of 35 ATSR images taken over the same region 
during the same period of the year ( summer 1992). The water vapour amount estimated by the new algorithm 
defined in Section 4 can be written : 
Wv = 8.229 - 7.705/?ii.i2 (4) 
This amount has been calculated in the same way over the ATSR-M integration spots and compared to the 
microwave radiometer measurement. After elimination of the cloudy areas, the number of ATSR/MW spots 
kept is 41. The results of this comparison is shown on Figure 5. 
i* 
3 
© 
a. 
w 
a> 
« 
£ 
£ 
< 
Figure 5 : Scatter plot of retrieved water vapour from ATSR/IR versus the retrieval from ATSR/MW 
The correlation is very good with a standard deviation of 0.38 g/cm 2 relatively to the ATSR/MW instrument. 
But a complete study of the accuracy of the algorithm can only be done by comparing the retrievals with 
coincident radiosonde measurements, to eliminate the errors due to the ATSR/MW instrument. Then, the error 
will probably be lower. 
Nevertheless, this accuracy is sufficient for our purpose which is the classification of the atmospheres 
for the choice of the Split-Window algorithms for surface temperature estimations (the 8 water vapour classes 
corresponding to the following mean values : 0.26, 0.72, 1.26, 1.71, 2.21, 2.76, 3.44, 5.01 g/cm 2 ). 
These preliminary results have to be confirmed on a larger database involving situations corresponding to all 
climatic conditions in order to test the sensitivity of the algorithm to the atmospheric temperature particularly. 
The next step will be the comparison with another methodology developed to obtain the columnar 
water vapour content which is the variance ratio method proposed by Jedlovec (1990). This method has several 
advantages and among others, the effects of surface emissivity differences are minimized and generally 
negligible as shown by Sobrino et al.(1994). Then, these methods will be tested over continental areas where 
radiosonde data may be available.
	        
Waiting...

Note to user

Dear user,

In response to current developments in the web technology used by the Goobi viewer, the software no longer supports your browser.

Please use one of the following browsers to display this page correctly.

Thank you.