Full text: Fusion of sensor data, knowledge sources and algorithms for extraction and classification of topographic objects

International Archives of Photogrammetry and Remote Sensing, Vol. 32, Part 7-4-3 W6, Valladolid, Spain, 3-4 June, 1999 
118 
(a) (b) 
Fig. 2. GGP (a) and GLP (b), both with scale ratio p/q — 3/2 
and layers 0 to 3, of a 513 x 513 (513 divides by 3, 512 does 
not)) detail from Landsat TM Band 5 of Elba Island. 
Frequency response 
(a) 
Frequency response 
while (3) becomes expansion by p followed by reduction by q: 
expand p / q [Gk] = reduce q {expand p [Gk]}- (7) 
The Generalized Laplacian Pyramid (GLP) (Aiazzi, 1997a) with 
p/q scale factor between two adjacent layers, Lk, can thus be 
defined, for k = 0,..., K — 1, as 
Lk (m, n) = Gk(m,n) — expand p/q [Gk+i](rn,n) (8) 
which may also be written, by replacing (6) in (8), as 
Lk(m,n) = Gk(m,n) — expand p / q {reduce p / q [Gk]}{m,n) 
(9) 
Again, the base-band layer is added to the GLP: L/c(m,n) = 
Gk (m, n), to yield a complete multi-resolution description, suit 
able for merging data imaged with a p/q scale ratio, p and q being 
two integers which are assumed to be prime to each other to yield 
a unique representation of all possible cases, and thus to avoid 
designing different and unnecessarily cumbersome filters. 
Figure 2 portrays the GGP and the GLP (p/q — 3/2) of the 
sample TM-5 image. Notice the non-octave low-pass and band 
pass behaviours of the former and of the latter. 
(b) 
Frequency response 
(C) 
Fig. 3. Frequency responses of pyramid-generating filters: (a) 
polynomial half-band, (b) with cut-off at one-third of band 
width, (c) with cut-off at one-fifth of bandwidth (29 coeffi 
cients or taps. Reduction filters are used for expansion, with 
a DC (or zero-frequency) gain set equal to their expansion 
factors 2, 3 and 5. 
2.3 Pyramid-generating filters 
Filters with different frequency responses are to be designed 
to сорю with the scaling requirements of the pyramid algorithm. 
In particular, for a p/q scale ratio, p > q, if normalized fre 
quency is considered, only one filter with 1 /p cut-off is needed. 
In fact, when (4) is cascaded to (5), the low-pass filtering step 
can be omitted after up-sampling by q (t q) in (6), as well as 
before down-sampling by q (| q) in (7), by assuming that fil 
ters are close to exhibit ideal frequency cut-offs, i.e rectangular 
responses. Although this assumption would require an infinite 
number of coefficients (the samples of a sine function), it may be 
approximated with a reasonable number. 
In the case p = 2, polynomial kernels with 3 (linear), 7 (cu-
	        
Waiting...

Note to user

Dear user,

In response to current developments in the web technology used by the Goobi viewer, the software no longer supports your browser.

Please use one of the following browsers to display this page correctly.

Thank you.