CI PA 2003 XIX th International Symposium, 30 September - 04 October, 2003, Antalya, Turkey
488
In the following two different applications for
cultural heritage applications are demonstrated
using both systems:
Figure 5: Colour image of panoramic camera
Castle in Sweden:
In the next example the inside of a castle in
Sweden (Stockholm) had been scanned and
surveyed by using the Z+F IMAGER 5003 and
the Panoramic Camera. The task was to survey
some rooms in the castle and make a 3D colour
model as well as orthophotos for documentation
purposes.
Figure 6: Reflectance Image (section)
Figure 7: Panoramic Image (section)
The surveying was performed in less than one
day and the modelling afterwards took approx.
1 week. Especially the superimposing of colour
information was quite hard, as the requirement
was to have not even a single hidden area.
Therefore not only with the modelling but also
with the surveying it was really important to
scan every small detail.
Figure 6 and 7 show the measured raw data of
the Z+F IMAGER 5003 (Figure 1) and of the
DLR camera (Figure 2).
Figure 8: Orthophoto of one wall in castle
These information are combined and result in
both the orthophoto shown in Figure 8 and the
3D colour point cloud in Figure 9, super
imposed from measurements of the IMAGER
and the DLR camera.
Figure 9: 3D Colour point cloud
Castle Neuschwanstein:
In the next example the inside of the castle
Neuschwanstein had been scanned and sur
veyed by using the Z+F IMAGER 5003 and the
Panoramic Camera (DLR).
