×

You are using an outdated browser that does not fully support the intranda viewer.
As a result, some pages may not be displayed correctly.

We recommend you use one of the following browsers:

Full text

Title
International cooperation and technology transfer
Author
Fras, Mojca Kosmatin

109
• Documented procedure for the verification of the
photogrammetric coverage and the scale of the
photograms;
• Documented procedure relative to the A.T. phase
and topographic measurements
• Documented procedures relative to the modalities
of copying, with particular regard for the
classification and interpretation of the elements,
phase completion times and the checks to be
carried out on the areas that are not directly visible;
• Documented procedures relative to the land survey
stage, with particular regard for the instrumental
campaigns of the elements of the territory that are
not visible in the photographs; sample verification of
the metric standards;
• Documented procedures relative to the phase of
electronic elaboration of the maps;
• Instrument maintenance to assure a continued
process capacity.
• Check of conformity of the quality plan;
Naturally, documented procedures must be actuated
for the registration of the checks carried out during the
process to be correlated to the finished product and its
destination.
3.5 Finished product
The finished product is the numeric map, or
geographical data base, its fundamental property is
responding exactly to the morphological and
anthropical situation of the surveyed area.
Therefore, even if the production cycle finishes with the
consignment of the map and the information in
electronic form, the supplier must guarantee the results
above all the technical-administrative verification and
testing carried out at the end to verify the quality of the
operations carried out.
3.6. Contract re-examination
With reference to the product, and to the tests carried
out to verify that it satisfies the required requisites, the
contract re-examination is aimed at verifying that:
- the final characteristics of the product are “adequately
defined and documented”.
- the requirements conform to what is offered;
- the supplier is able to satisfy the requisites indicated
in the contract and can guarantee the tests required.
3.7. Preventative and corrective actions
The verification of the conformity, also following
complaints by the client, activates the process of
identifying the possible preventative/corrective actions
by which the cause can be eliminated and the repetition
of analogous situations avoided.
These procedures include complaint management,
identification of the cause, definition of
preventative/corrective actions and the verification of
the efficacy of corrective actions.
4. CONCLUSIONS
The production of “quality” numeric maps allows,
through the programmed actuation of documented
procedures in the various phases of production, to
guarantee the desired characteristics.
The study of the ISO 9000 legislation and the analysis
of the production cycle of the “map” product/service
have allowed the evaluation of the fundamental aspects
for the creation of a “Quality Manuel” for the
aerophotogrammetric based cartographic production.
In this paper our attention has been focused on the
aspects of the production cycle that have a direct
influence on the quality of the product, showing, in
particular, the importance of defining control
procedures for the complex phases of design, of
verifying properties and accepting in-coming materials,
as well as the production cycle.
It must be said, furthermore, that in the area of a
Quality system, the training of staff and the prevention
of accidents at work play an important role.
Bibliography
ISO-TAG4/WG3, IEC, BPM, OIML, IUPAC, IUPAP,
IFCC, 1993. “Guide to the expression of uncertainty in
measurement”
ISO 9000-1, 1994 “Norme di gestione per la qualità e
di assicurazione della qualità”
ISO 9001, 1994 “Sistemi Qualità Modello per
l’assicurazione della qualità nella progettazione,
sviluppo, fabbricazione, installazione ed assistenza”.
ISO 9002, 1994 “Sistemi Qualità - Modello per
l’assicurazione della qualità nella fabbricazione,
installazione ed assistenza”, dicembre 1994.
Gaietto R., Spalla A., 1994 “Lezioni di Topografia”, Ed
CLUP, Pavia, 1994
G. Mattana, 1996 “Il congresso 1995 della
Organizzazione Europea per la Qualità EOQ Qualità
n°1/96, Italia.
GISFORM-ANIAF, 1999 “Progetto RASTER” , www.
gisform.it.