Full text: Mapping without the sun

Secondly, use high time/frequency GPS data to interpolate the 
original results mentioned above. Then the quasi-GPS time 
series data can be obtained with time domain interpolation. 
Finally, Kalman filtering can be used to estimate and predict the 
quasi-GPS data with both spatial and time domain interpolation 
to get full surface subsidence deformation value of mining area 
with high precision. 
3. MAIN PROBLEMS OF GPS/INSAR DATA FUSION 
The researches of InSAR/GPS data fusion fields already 
acquired important progress, while this technique also needs to 
be improved because of its problems. The main problems are as 
follows: 
1) At present, there isn’t a set of complete InSAR/GPS data 
fusion theory and method. The GPS data correction researches 
focused on a certain InSAR error. 
2) The phase unwrapping algorithm takes great effect on InSAR 
products precision, however, up to now no practical 
unwrapping algorithm was applied. 
3) Only GPS data was used to establish the model of 
atmospheric delay error, whereas the InSAR data itself is 
ignored. Theoretically, GPS data could create high precision 
atmospheric delay model, but it can only apply single point 
information and must use spatial interpolation to realize 
modeling, this will cause the decrease of data precision 
undoubtedly. 
4. CONCLUSIONS 
InSAR/GPS data fusion technique plays an important role in 
monitoring the surface subsidence in mining area. GPS 
technique can take its advantages on InSAR data, such as the 
modeling of atmospheric delay error; the establishment of 
InSAR satellite orbital parameters, the geometric correction of 
InSAR data, and so on. While InSAR data could apply 
furthermore detailed spatial information of the mining area 
surface. 
In monitoring the surface subsidence of mining area, the 
following countermeasures are given as references to improve 
the monitoring precision, the spatial and time resolution, and 
the result reliabilities. Which may provide technical support for 
realizing real-time dynamic monitoring of coal mining-induced 
subsidence. 
1) PS-InSAR technique should be used in InSAR/GPS data 
fusion field widely. This could reduce the impact of spatial and 
time resolution limitation of traditional InSAR greatly, and 
improve the monitoring precision even to sub-centimetre. 
2) Making associated use of permanent scatterer points, grade 
levelling root control points and GPS levelling points 
measurements, and adopting suitable data processing algorithm 
(spatially the phase unwrapping algorithm) could improve the 
calculation precision and reliability. 
With the implement of the world’s GPS network engineering 
and the improving of SAR resolution (including the 
improvement of SAR satellites orbital parameter precision), 
The integration of InSAR and GPS data’s application in 
mining-induced subsidence monitoring will be more extensive. 
InSAR/GPS data fusion technology may become one of the 
most powerful means in monitoring the surface subsidence of 
mining area hopefully. 
REFERENCES 
Diao, J., 2005. Study of Data Integration of GPS and InSAR 
Monitoring Surface Subsidence. Dissertation of the degree of 
Master of philosophy from Shandong University of Science and 
Technology, pp. 3-7. 
Chen, J., 2004. InSAR-GPS-GIS Data Integration and Applica 
tion to Detection of Land Subsidence. Journal of Geodesy and 
Geodynamics, 24(3), pp. 87-91. 
Xu, C., Wang, H., et al., 2003. Prospect on the Integration of 
GPS and InSAR data. Geomatics and Information Science of 
Wuhan University, 28 (5), pp. 58 - 61. 
Ge, L., Chris R., et al., 2001, Mining Subsidence Monitoring 
Using the Combined InSAR and GPS Approach. The 10th FIG 
International Symposium on Deformation Measurements, 
California, Orange, pp.5-6. 
Qiao, X., Li, S., et al., 2002. Monitoring Crustal Deformation 
by GPS and InSAR in the Three Corge Area. Wuhan University 
Journal of Natural Sciences, 7(4), pp. 451-457. 
Fan, Q., Tang C., et al., 2006, Applications of GPS and InSAR 
in Monitoring of Landslide Studies. Science of Surveying and 
Mapping, 31(5), pp. 60-62. 
Ge, L., Shao, W. and Chris R., 2000. The Double Interpolation 
and Double Prediction (DIDP) Approach for InSAR and GPS 
Integration. IAPRS, Vol. XXXIII, Amsterdam, pp. 205-212. 
Volker, J., Ge, L., et al., 2003. Tropospheric Delay Corrections 
to Differential InSAR Results from GPS Observations. Proc. 
6th Int. Symp. on Satellite Navigation Technology Including 
Mobile Positioning and Location Services (SatNav), Melbourne, 
Australia, pp.22-25. 
Shi, S., 2000. DEM Generation Using ERS-1/2 Interferometric 
SAR Data. ACTA GEODAETICA ET CARTOGRAPHICA 
SINICA, 29(4), pp. 317-323. 
Ge, L., Eric, C., et al., 2003. Quantitative Subsidence Monitor 
ing: The Integrated InSAR, GPS and GIS Approach. The 6th 
International Symposium on Satellite Navigation Technology 
Including Mobile Positioning & Location Services (SatNav), 
Melbourne, Australia, pp.46-49. 
Biirgmann, R., Hilley, G., Ferretti, A. and Novali, F., 2006. 
Resolving Vertical Tectonics in the San Francisco Bay Area 
From GPS and Permanent Scatterer InSAR Analysis. Geology, 
34, pp. 221-224. 
Zhang, J., Song, W., et al., 2007. Discussion on PS-InSAR 
Technique and its Application in Mining-induced Subsidence 
Monitoring. Proceedings of the 13th International Congress of 
International Society for Mine Surveying, Budapest, Hungary, 
(To be published). 
ACKNOWLEDGEMENTS 
This work is supported by the National Natural Science 
Foundation (No.40571104) and the Excellent Youth Research
	        
Waiting...

Note to user

Dear user,

In response to current developments in the web technology used by the Goobi viewer, the software no longer supports your browser.

Please use one of the following browsers to display this page correctly.

Thank you.