GVII-58
PHOTOGRAMMETRIC ENGINEERING
one topic at a time. For example, all that is needed regarding transportation
should be interpreted before proceeding to the topic of drainage. It is true that
the interpretation of one topic aids another. Such aid is apparent as an inter
preter proceeds from topic to topic, particularly if it is in the order listed and
described below.
Some research requires description or mapping of all of an area. However,
unless full coverage is demonstrably essential, interpretation by the sampling
procedure is highly recommended. With the use of other source material re
searchers usually should be able to select areas, strips, lines, or spots and to
place them in representative, mechanical, or random locations before interpreta
tion is begun. Certainly research with air photos should not be assumed to re
quire complete analysis of an area any more than if that area is analyzed by
large-scale maps or detailed statistical data.
2) Interpretation should he made from the general items to the specific. Or,
we may say from the small-scale to the large-scale considerations, whether or
not generalizations are to be the end product of the analysis. The first view of
the photos should be with the naked eyes and of the smallest scale coverage
available, such as photo indices, mosaics, and smaller scale verticals and
obliques. By this step are discovered broad regional patterns which are too
subtle to be seen on single photos as well as the discontinuous patterns which
must be viewed over large areas to observe any continuity at all. After the naked
eye study, examination of the smaller scale verticals with a mirror stereoscope,
without binoculars, will be a natural step toward more detail. The study of
large-scale vertical coverage is more effective when done last for here detail
is the only thing apparent. In particular is this true when pocket stereoscopes
are used because the diameter of the effective area seen directly beneath the
two-power lenses is less than three inches, and that beneath the four-power
lenses is less than one and one-half inches.
In general, there is too great a tendency for photo interpreters to become
lost in detail, and too little effort to conquer the tendency; the prevention, and
more efficient interpretation, is by working from the general characteristics
toward the specific ones of each topic interpreted.
3) Interpretation should be done from the known to the unknown features.
Just as we “screen” the photos a topic at a time, so should we establish early
what is clearly recognizable from other source materials and previous experience.
Generally there is little need to methodically identify a feature on a photo when
an available map or report already identifies it. For encouragement and efficient
interpretation it is valuable to establish rather soon in the research what parts of
a topic are recognizable on a photo. These items must then be verified by com
parison with source materials, by examination of the photo pattern, and by
measurement of the object to determine its size (particularly necessary with
respect to cultural features). What is absolutely identifiable on the coverage
is then available for comparison with the unknown features; this comparison
of known with unknown is very basic procedure.
Then two thought-provoking questions must be applied rigorously to the
unknown. Is it a part of or directly related to the topic being analyzed? If the
answer is in the negative the item should be skipped immediately. If there is
doubt or if the answer is in the affirmative, identification should be sought.
Any possible identification must then be recognized as only a possibility by
repetition of the second question: what else could it be? This question must be
posed many times until identification is certain or until the number of possibili
ties is as limited as it can be. It is this last question which is one of the more